Ballast water management system

Error message

Notice: Undefined index: en in views_handler_field_field->get_items() (line 602 of /var/www/www.loenenrepairs.nl/htdocs/drupal-7.0-rc4/sites/all/modules/views/modules/field/views_handler_field_field.inc).

In cooperation with Hatenboer water, we can offer you a “Turn key” Ballast water management system, to install on any kind of vessels.   The BWMS Hatenboer provides is the GloEn-parol from Panasia

  • Known as the most environment friendly system on the market. 
  • Compact design.
  • Automatic back flushing and auto wiping.
  • No toxic by products
  • Very simple operation.
  • Easy and economical maintenance.
  • No corrosion problem.
  • Less inflow of sediment.

This system works with a Filter unit and UV unit.    

 

How does the filter unit work?

The water enters trough the inlet pipe into the filter area and flows through the cylindrical filter element from inside out. The filtration takes accumulating on the element surface causes pressure differential to develop across the filter element. When this reaches a pre-set value, the back-flushing mechanism is operated. The back flushing  begins when the filter element reaches a pre-set value or a determined lapse of time. The back-flushing takes between 10 to 30 seconds. During the back-flushing cycle the filtered water is not interrupted and continues to Flow downstream of the filter in the normal manner.  

Specification of filter:

  • Removing large materials over 50 µm.
  • Rises UV light transmission.
  • Low pressure drop.
  • Automatic back flushing.
  • Screen size: 50 µm
  • Capacity: 50 - 6,000 m³/hr
  • Max. pressure: 10 kg/cm²

How does the UV unit work?

Using UV light to disinfect water is a proven technology. This safe and effective physical disinfectant is suitable for both large and small applications.  UV’s proven technology uses nothing but ultraviolet light to inactivate bacteria, viruses and  Other organisms that are present in the water. UV unit is easy to operate and needs no expensive and potentially hazardous chemicals. UV light, which continues to be reliable means of disinfection, involves exposing contaminated water to irradiation from UV light. This treatment really works because UV light penetrates an organism’s cell walls and disrupts The its genetic material, making reproduction impossible.  

Specification of the UV unit:

  • Long life span UV lamp.
  • Disinfection of micro-organism.
  • Easy maintenance and operation.
  • Automatic cleaning wiper.
  • Capacity: 50 – 6,000 m³/hr
  • Max pressure: 10 kg/cm²
  • Explosion proof type ( option)

Monitoring and control panel: The monitoring and control panel is PLC (Programmable Logic Controller) based and Configured to activate and deactivate UV lamps via electric ballasts to maintain sufficient UV dose while conserving power. The monitoring and control panel offers a real time monitoring of the status of system operation while logging the data required by the convention at the same time.